How to Install New Sink Plumbing Step-By-Step

If you’ve ever wondered how to install a new sink, then you’ve come to the right place. Here, we’ll walk you through the process step-by-step. Before you can begin, you need to measure the space where your old sink sat. Once you know how deep the sink is, you can then start installing the new drain. Make sure the new drain is flush with water. Lastly, install the new faucet. First, you should measure the size of the drain opening and the pop-up body. Use plumber’s putty and slip washers to install the new drain. Also, you can use a flange washer, which will eliminate the need for plumber’s putty. Once you’ve installed the strainer, you can tighten the locknut with pliers. If you’ve chosen the sink that doesn’t come with a strainer, you’ll need to install the drain. Before installing the new drain, be sure to remove any old plumbing. Make sure to remove any debris from underneath the sink, as well. Next, make sure that you clean the area where the new plumbing will sit so that there are no leftover pieces of sealant. Lastly, be sure to use plenty of plumbers’ putty so that you don’t have leaks around the connection points. If you don’t use enough plumbers’ putty, you might be setting yourself up for a huge problem down the road. The process of installing a new sink may not be as complicated as you think. In fact, the average do-it-yourselfer can do the job in less than four hours. You’ll need to measure the depth of the old sink before installing the new one. This measurement will also be useful when adjusting the countertop and installing the new drain. And, if you don’t have a plumber, you’ll still be able to install your new sink with ease. Once you’ve removed the old sink, you can proceed with the rest of the plumbing. Then, attach the drain assembly to the sink’s mounting bracket. Make sure the drain is level and aligned squarely with the countertop. You may want to apply silicone caulk to the exterior of the sink. Then, use a caulk gun to seal around the sink’s edges. Make sure to remove any excess caulk when you’re done to avoid a moldy sink. Next, you’ll want to shut off the water supply to the old drain. The cold and hot water supplies are located below the sink. Disconnect the hot water line before working on this step. You can then unscrew the plumbing lines from the old drain. Once the old drain is removed, take a picture of the valve configuration to help you reconnect the water lines when you’re done. Turn on the faucet and let it drain to a new location. To begin installing your new sink, you should prepare all of the materials and tools you’ll need. These include plumber’s putty, a strainer, and silicone sealant. Also, remember to wear protective clothing and gloves when working around water. Lastly, make sure to take pictures of your plumbing before starting. This will help you compare the new sink to the old one and make necessary adjustments. It can also help you avoid making a mistake that can be costly. Click here to learn more about vaillant boiler repairs derby.