How to Reroute Bathroom Plumbing

There are a couple of reasons why you may need to reroute bathroom plumbing. Changing the location of a toilet can cause a variety of issues, including a decrease in the structural integrity of the house. In addition, improper plumbing routing can compromise the safety of a home, so it’s important to follow building codes to avoid damage. To reroute your bathroom plumbing properly, consider the type of plumbing you have in place. A new sink drain requires a different plumbing configuration than the old one. In order to achieve the most effective drainage, the new sink drain should drop between the wall studs. It should tie into a larger drain located near the new sink. Make sure you consult a plumber to make sure that the new sink drain will work safely and efficiently. Before rerouting your bathroom plumbing, make sure you check the location of the pipes before starting any work. If your home has vertical ducts or support beams, you may need to obtain a permit. Once you know the area where you want to reroute your bathroom plumbing, you should start laying out the new layout. It’s important to remember that new plumbing lines are usually a combination of older and new pipes. You can either reroute the existing pipes or install new ones to fit in the new design. The old plumbing path can be the easiest route to take. This method is best suited to modern homes that have flexible materials. If the sink and toilet are on the same floor, you’ll need to access the tub and shower plumbing from a different sidewall or an adjoining room. A sidewall in a bathroom or closet is a great location for access panels. If you don’t have access to an adjacent room, the closet is the best option. Ultimately, you’ll have to decide where to reroute the bathroom plumbing to. When rerouting bathroom plumbing, it’s best to hire a professional plumber. The pipes must be carefully positioned, and the new fittings must be installed to avoid injury. Changing your pipes may require several days of work, and you shouldn’t attempt it on your own. If you don’t want to risk your health, it’s better to hire a professional. These professionals will be able to reroute the plumbing without damageing your home. If you’re replacing your old plumbing, make sure that your new pipes are sloped properly to avoid sewerage system blockage. The slope of the pipes should be at least 1/4 inch for every four feet of the waste pipe. This slope is essential for toilets, sinks, and showers, as well as any other bathroom fixtures. Otherwise, liquid waste could overrun the slope and clog your toilet. This may be more complicated than you initially thought, but it is well worth the effort. Click here to learn more about central heating boiler repairs derby.