How to Install Toilet Bowl Plumbing

If you’re wondering how to install toilet bowl plumbing, you’re not alone. It can be a complicated process to figure out how to connect the toilet’s tank to the bowl, so we’ve compiled some tips and tricks to make the task as easy as possible. First, you need to remove the toilet tank and bowl from each other. You can do this by unscrewing the bolts that connect the tank to the bowl, which is usually connected with an adjustable wrench. Then, use a screwdriver to open the caps on the toilet’s bolts and lift the tank straight up from the bowl. To remove the old toilet, remove its bolts. Next, remove the waxe ring and the flange. This is called the toilet flange, and it leads to the sewer line. Remove the waxe ring from the flange using a putty knife. Then, cover the hole with a rag and avoid cutting the drainpipe. If the old toilet is in a tight spot, place a towel beneath the tank. After this, you need to insert the “tank to bowl” gasket into the base of the flush valve. Next, you need to install the supply line through the two bolt holes in the tank. Using a hacksaw, cut any bolts that extend over the nuts and washers. Insert the supply line into the tank nut and tighten the bolts until the tank and bowl are secured. Once you’ve completed the installation, attach the supply line to the exposed portion of the fill valve. Once the toilet is installed, the plumber will assemble the toilet tank and bowl. He’ll then insert the bolts that attach the holding tank to the bowl. A rubber cushion is sometimes used to protect the tank. Be careful when tightening the bolts, because they can damage the porcelain. Next, he’ll adjust the inner tank assembly, which includes the ballcock, flapper valve, and other essential parts. Finally, the plumbing professional will connect the water line and turn on the water supply. You must also secure the waxe ring in place. The waxe ring can break and lead to leaks. Therefore, you must take great care to secure the waxe ring. After placing the ring in place, tighten the bolts one quarter turn at a time. Be sure not to overtighten the bolts as you might end up cracking the toilet bowl base. Once the pipe is securely secured, install the toilet. If you are a novice in plumbing, you may want to consider hiring a professional plumber to do the installation for you. These professionals are licensed and insured, and have the tools and equipment necessary for the job. Hiring a plumber to install the toilet will avoid many of the pitfalls you’re likely to encounter when doing it yourself. It will also help you keep your project on schedule and budget. Remember that mistakes made during the installation process can end up costing you much more money in the long run. Click here to learn more about new boiler quote derby.