What Does a Plumbing Snake Do?

So what does a plumbing snake do, and how can you use one? In this article, we’ll answer this question and discuss some of the more common uses. A plumbing snake is a flexible auger used to dislodge clogs from plumbing pipes. Sometimes referred to as a “toilet jack”, this tool is often reserved for the toughest clogs. Hopefully, this article has answered your question! Before using a plumbing snake, you need to remove the p-trap. This step will make the snake easier to use, as you’ll be able to see if there’s any debris stuck in the p-trap. You can also uncoil the snake by rotating the handle in a clockwise motion. Once you’ve got it uncoil and inserted into the pipe, you should feel pressure inside the pipe. A plumbing snake can also be used to clear an obstructed drain. Its auger head resembles a corkscrew. You feed the snake through the drain, rotating it while you push it in. Once the auger reaches the clog, stop turning the snake and let the water flow for a few minutes. Depending on your pipe size, you might need to use more than one snake, so be sure to find the right one for the job. Another common use for a plumbing snake is to repair damaged pipes. If the pipe is made of galvanized steel, it’s likely to become rusted or corroded over time. In such cases, a motor-powered snake can crack the pipe or damage it further. This can cause a plumbing problem, so you must be very careful about what you pour down your pipes. If you don’t want to break it, you shouldn’t use a snake with a metal tip. In order to fix clogs, you can use a drain snake, a hand-held version, or a motorized one. Drain snakes are inexpensive, convenient, and easy to use. However, if you have a particularly stubborn clog, you should consider purchasing a power auger instead. It’s usually more efficient and powerful than the manual version. But, whatever you choose, make sure you read the instructions before using it. Using a plumbing snake to clear a drain is an easy way to remove a clog in the pipes. It’s a good middle ground between plunging and professional drain cleaning. They’re especially effective in pipes with a lot of curves and hard to reach places. If you’re having trouble clearing a drain, call a professional plumbing company in Glendale to see if they can do the job. First, uncoil the cable of the snake. You’ll want to get as close to the drain entrance as you can, but don’t force it into the drain as this may damage the pipe or entrance. The snake cable should not be longer than necessary, and it should be inserted at a slow pace, without any pressure on the pipe. You might have to repeat this process several times to get the right result, but it’s worth it for the results! Click here to learn more about local plumbers in derby.